Stainless steel sculpture is a new type of sculpture developed on the basis of traditional stone carving, bright, lifelike, environmental friendly, in line with the of urban life, gradually accepted by the citizens. As a popular modern material, it is often used nowadays.

The corrosion resistance. Most of stainless steel products require high corrosion resistance, like tableware, kitchen utensils, water heater, water dispenser. Some clients make corrosion resistance tests by heating NACL aqueous solution to boiling, cool for a while and pour away liquid, weighing loss to determine the degree of corrosion.

The polishing performance. The fabrication process of stainless steel products generally contains polishing, and only a few products such as water heater, water dispenser liner do not need to polish. Therefore, the raw material polishing performance is required to be good. The factors affecting polishing performance are as follows:  raw material surface defects such as scratches, points; Material problem. Low hardness may result deep stretching on the surface; After the deep stretching of the products, the surface of the highly deformed area may produce small black spots. During polishing, cloth sand or sandpaper contains Fe composition, which may lead to rust spots.

Stainless steel sculpture is common now with good corrosion resistance, at the same time, the surface applied with a layer of passivating coating film. According to the different application conditions of stainless steel, their oxidation degrees are not the same.

Owners need to carry out appropriate maintenance and regular cleaning by cleaning on the surface with neutral detergent, and then wipe the surface with towel. For the large dirty area, use manual spray gun, and then clean with dry towel gently. It is recommended to wear gloves by hand to prevent the stainless steel sculpture scratch, also prevent the sweat corrosion.